I am going to install a new Firewall harness on my car, and I was wondering if anyone had instructions on how to do it. I know you jsut start unplugging things one by one and replacing them, but I need to know what wires I am supposed to Re-tap into on the new ECU plugs. I know I need the VTEC ones and the Injectors, but if someone had a diagram of this, I would Appreciate it. Also Is there anything special involved in doing this stuff. Basically I want to get a new firewall harness, because my OLD ECU plugs are torn up, been spliced into and then connected again, then respliced and again put back together. So I jsut want to do this to clean everything up.