clearing headlights with sticker?
 

had anyone heard of people clearing there or color matching their headlights with stickers?..and if so..what do they use?...also..any one see eyelids for the 02 tl?

also..is the camber bad with a 1.75 inch drop?

If you want your car to look clean, the only way to do it is to take the amber reflector out. Putting vinyl stickers over the light is tacky.

What springs are you running? Just because it says 1.75 inch drop, it does not necessary mean your car will drop that much. Are you getting springs made for the Accord V6? If so, your car will be lowered more than 1.75 inches and yes, you will need a camber kit.

well i dont want to risk ruining my headlights..so i dont think ill be taking o ut the reflector...but see any eyelids..

also..i plan on running an H&R kit...so you think 1.75 inches will need a camber kit?...how much lower do you think it'll go once it breaks in?

No offense, but you'd have to be a complete moron to ruin your headlights. It's an extremely simple operation if done with a good heat gun and a couple of screw drivers. On my old Accord, it took me about an hour to do the first one and about 15 mins to do the second one. I was really afraid I'd mess it up, but once I started doing it I realized how careless you'd have to be to end up screwing it up. As long as you put on tons of silicon at the end, you're in fine shape. Vinyl stickers look tacky as hell IMO, same with most eyelids.

I believe the H&R kit is made for the V6 Accord. And since the TL weights more than the Accord, it is going to be lowered than 1.75 iches. I think you are going to need a camber kit.

Yes, you will ne a camber kit. I'm running the H&R Sports and the rear tires are a tad off.... my camber kit is going on in the spring.

As for the lights... take the time to clear them... don't ruin the look with a decal... it just looks bad on this car.

hey types, i have a spare set of cleared headlights, if ur interested. lemme kno thru pm or email. gte845i@hotmail.com

sunny