Factory Acura Alarm
05-21-2003, 05:37 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Factory Acura Alarm
I've got a factory Acura alarm with keyless entry, etc. in my '95 Integra. It works fine, but the remote is trashed, cracked, cruddy. And I need more than one, anyway.
Plus, I've since gotten a remote starter with keyless entry, but no alarm. The starter, however, has output wires to activate and deactivate a seperate alarm system. I want to hook the starter up to activate and deactivate the factory Acura alarm, of course. The starter's got seperate wires to activate and deactivate the other system, but I don't know where the equivalent input wires would be on the alarm.
Could anyone tell me where something like this would be on the factory alarm?
Plus, I've since gotten a remote starter with keyless entry, but no alarm. The starter, however, has output wires to activate and deactivate a seperate alarm system. I want to hook the starter up to activate and deactivate the factory Acura alarm, of course. The starter's got seperate wires to activate and deactivate the other system, but I don't know where the equivalent input wires would be on the alarm.
Could anyone tell me where something like this would be on the factory alarm?
05-26-2003, 01:54 AM
#4
Junior Member
Thread Starter
Join Date: Jan 2003
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SumAccordGuy94
so basically you want the starter remote to lock and unlock the doors?
so basically you want the starter remote to lock and unlock the doors?
05-26-2003, 05:17 AM
#5
Older Honda Fanatic
Join Date: Jul 2002
Location: Adirondacks of NY
Posts: 3,154
Likes: 0
Received 0 Likes
on
0 Posts
the oem alarm arms through the transmitter or passively... and disarms with the transmitter or the valet button.
Judging by this, the factory remote directly controls the alarm module... then the module sends signals to lock and unlock the doors... there will not be inputs for arming/disarming.
Judging by this, the factory remote directly controls the alarm module... then the module sends signals to lock and unlock the doors... there will not be inputs for arming/disarming.
