Notices
Audio, Security, & Automotive Lighting Troubleshoot wiring problems and get equipment suggestions all in one place. Now expanded to include Automotive Lighting

5th Gen EX Audio

Thread Tools
 
Old Jan 5, 2007 | 11:13 PM
  #1  
scotttharobot's Avatar
scotttharobot
Thread Starter
beer here
 
Joined: Jun 2006
Posts: 3,278
Likes: 0
Default 5th Gen EX Audio

Hey, I'm just curious about the stock audio system in the 5th gen (94-97) Accord. Does the EX system have tweeters? If so, could someone take a pic of the location?

Thanks,
Scott D.
Reply
Old Jan 7, 2007 | 07:43 PM
  #2  
dleccord's Avatar
dleccord
Member
 
Joined: Mar 2006
Posts: 395
Likes: 0
Default

yeah. 5th gen ex's have their tweets where the lower corners of the windshield meets the dash. iono how to get the them but i bet you gotta take the dash out. are you planning to run some components?
Reply
Old Jan 7, 2007 | 09:03 PM
  #3  
AJē06's Avatar
AJē06
Senior Member
 
Joined: Sep 2006
Posts: 893
Likes: 0
From: DFW
Default

Originally Posted by dleccord
yeah. 5th gen ex's have their tweets where the lower corners of the windshield meets the dash. iono how to get the them but i bet you gotta take the dash out. are you planning to run some components?
I dont know how to remove the dash... :0
Reply
Old Jan 7, 2007 | 10:18 PM
  #4  
dleccord's Avatar
dleccord
Member
 
Joined: Mar 2006
Posts: 395
Likes: 0
Default

what is it like a 2+ hour job alone? you're better off installing the tweets in the door panels or pillars. i never did like having the tweets bouncing off the windshield.

Originally Posted by AJē06
I dont know how to remove the dash... :0
learn. and then make a DIY so i can do it too, that is if i need to
Reply
Old Jan 9, 2007 | 11:07 AM
  #5  
scotttharobot's Avatar
scotttharobot
Thread Starter
beer here
 
Joined: Jun 2006
Posts: 3,278
Likes: 0
Default

Yup, components are going in.

I was planning on mounting the tweets in the sail panels.

Quick question - how many of you guys are running pretty large mids in the stock location? I have a set of elemental designs eDi 6500's - and I did some measuring, and looks like everything should fit with a 1" MDF spacer (while taking off the stock basket)... anyone tried this in the 5th gen sedan?
Reply




All times are GMT -8. The time now is 12:15 PM.