08SnakeEyes08

i got 1 idmax...... i don't wanna embrasse myself by hitting less then 140 lol. my sub sound great but i think it hits 140 max.

anyone got 1 idmax?? i got 800 watts going to it (dei1100d)


what u hit?

anyone with a 12" that hit 140 here? if u do, what sub and amp.

b00gers

im sure it can hit 140...but there are too many dependants to say for sure.

but if the right box is built....it is possible.

SiClone

If you're in a ported box, then you should be easily over 140. Sealed, I'm not sure.

Mine's in a sealed (1.6 after displacement) box, with a full 1100 watts from my DEI 1100d, and it does get loud. Just haven't been metered...

08SnakeEyes08

my box is like 1.35 after displacement.... its ported tuned to 28 hz....

my old 2 12 he2's hit 143.... and i don't think my idmax is at that level. SQ is great... need 1 more.... who knows someone who has a 4 ohm idmax for sale right now>???

hey siclone..... u think our dei1100D can sound good at 600 watts a sub?? pushin about 1200 watts at 1 ohm.....600 a sub...

how many volts are u at constant?

SiClone

Your ported box is pretty small....

Anyway, 600 watts a piece should be fine. Many have been more than satisfied with a JL 500/1 on their MAX, so running 2 off of a DEI should be OK. As for volts, I'm not completely sure, but would assume I'm always above 12V with the car running. I used to have a digital read out cap in-line with a Memphis ST1000d powering my S15L7 and the lowest it ever dropped with full volume was around 11.8-11.9V, and that was at a very hard hitting bass note. I rarely go that loud anymore in my Si.

If in the future you want more power, sell the DEI for $300 and pick up a couple JBL BP1200.1's, so that each sub gets its own 1200 watts!!

Brad

i have mine in a 1.6 sealed box and powered by an audiobahn A18001DQ (1800x1 @ 1 ohm rms) BUT my max's voice coil is rubbing the magnet.. got damaged in shipping.. so i gotta send it back. i think im gonna sell it and buy a brahma





(first day i got it)