Alarm stopped working ( Clifford 2 way pager )
05-16-2006, 06:55 AM
#1
倍力恋
Thread Starter
Join Date: Aug 2004
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Alarm stopped working ( Clifford 2 way pager )
3.5 w/ remote start.
Okay, so my first remote broke. I bought a new one re-programmed it, all was good. Then the remote started saying it sent the signal but no response from the brain. So I figured the remote was bad, tried to do the procedure to repogram it, but the siren never sounded when it was supoused to. So now I know its the alarm not remote, I checked all fuses they seem to be fine.
Anyone expierence anything like this? I am about ready to pay a shop to fix it, but I don't want it to be something I am overlooking.
Okay, so my first remote broke. I bought a new one re-programmed it, all was good. Then the remote started saying it sent the signal but no response from the brain. So I figured the remote was bad, tried to do the procedure to repogram it, but the siren never sounded when it was supoused to. So now I know its the alarm not remote, I checked all fuses they seem to be fine.
Anyone expierence anything like this? I am about ready to pay a shop to fix it, but I don't want it to be something I am overlooking.
