Audio newbie question, please help
I need to know what kinda of box and amp for a sub with 500 watt RSM, 1000 watt max, i'm looking for something with plexiglass, um..also note that i'm on a tite budget.
|
Now wut kind of bass are u hoping to achieve? Personally i don't like plexi because bass tends to hit hard. Because i have 2 subs, i have a sealed enclosure. It gives a more rumble and loose bass. But anyone will tell u that it's best to hear it for yourself
|
12" IDQ or W3 mated with a JBL 300.1 or double each.
im not sure if JBL still made the powervalve amps...but i recommend this because ive had a similar setup for quite a while, and have no complaints...theres probably better...but thats my opinion. |
wait a sec..do u have the amp and sub already? or u just looking for a sub with 500 RMS blah blah blah?
|
I only have the sub, no amp or box yet. I want somethign to sound good but also look good because it's going to be a custom trunk, like i already said my sub has 500 Watt RSM, max power is 1000Watt, how do i know what sub is right for it?
|
itll be nice to know what sub it is.
|
tell us what sub it is, how many voice coils, and if its 2ohm, 4ohm or other. then we can match up a decent amp w/ it for ya
|
here is the specs for it thanks in advance, i also need to know what kinda box.
*12" Dual Voice Coil Woofer * Magnet: 160 oz. Double stacked Ferrite * Frame: 5 spoke Die-cast aluminum basket * Cone: Reinforced aluminum curvilinear * Surround: Oversized buytl rubber * Spider: 2 Flat ultra excursion * Power handling: 500 watts RMS, 1,000 Watts max * T Yoke: Industrial Chromed Hex bolt retained, Bumped and Vented * Double damper magnetic motor assembly * Cooling: Double Vented (T Yoke and Motor Side vents) * Voice Coils: 4 Layer Dual 4 Ohm High Temperature black Aluminum * Voice Coil Diameter: 2.2" * Nominal impedance: 4 ohms / per coil * DC resistance (Re): 3.2 ohms ea. coil * Frequency range: 20 Hz-1.1 kHz * Fs:30 Hz * QTS:.526 * QES:.614 * QMS:7.698 * VAS:56L (1.98 cu. ft.) * SD:.0491M * SPL:90 dB 1W/1m * Xmax:16mm * Mounting Depth: 165 MM * Mounting Hole Dia.:296 MM * Net weight: 22lbs |
Originally posted by Mid9Joker my sub has 500 Watt RSM |
It must be an EXPLODE or somethin cause dudes not tellin us who makes it! LOL!
|
All times are GMT -8. The time now is 04:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands