Notices

96 Accord EX 4cyl Need to fix exhaust leak

Thread Tools
 
Old 11-02-2011, 06:59 PM
  #1  
500$accord
Member
Thread Starter
 
500$accord's Avatar
 
Join Date: Jan 2008
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
Default 96 Accord EX 4cyl Need to fix exhaust leak

I just determined that I have an exhaust leak between my manifold and the A pipe that goes down below the engine. I was able to verify that by spraying some soapy water on the exhaust, starting it and holding a rag over the tailpipe. Lots of bubbles right in that area. There was also soot-like deposits on my a/c compressor.

Can anyone provide some lessons learned about getting these pipes apart and replacing the gasket. I caused myself problems when I snapped off two bolts holding my heat shield to the header... was never able to put the new shield I purchased in.

PB Blaster soaking??? impact gun on the three nuts?. I really don't want to snap any exhaust studs if I can help it. Does it make sense to leave the head to header gasket alone if it appears to be sound? Appreciate any suggestions.




All times are GMT -8. The time now is 09:46 AM.