Hi everybody, just got myself an Accord so I thoght I would look at the forums, and I have to say this is the best I have found so far so I thought I would post my question here. So, I bought some light up pedals cause they were on sale.....just 5 bucks....but, to make them light up, i have to hook them up to some wire that has 12 volts of juice in it.....but I don't know where that wire or set or wires may be that is closest to the pedals and would make the least amount of clutter and be the easiest and best to get to without possibly screwing up my car. If anyone knows, post me a response ASAP. Thanks again! :thumbup:

 

the fuse box on the lower left hand side there are usually a couple "unused" fuses

 

and these "unused" fuses you speak of.....i would i go about hooking it up?
there are 2 wires on the pedal side....and then the fuse box stuff on the other...hmmmmmm

 

get someone else to do it for you

 

that costs money
any way you could tell me how?

 

not without you catching your car on fire cause you want ricey pedals

 

Take the positive wire (probably red, or has some red stripe on it)strip an inch or two of the wire covering off so the wire is expsoed and wrap it around one of your fuses (the bottom metal portion, not the plastic top part). I did this for my indiglo gauges and they work fine. I wrapped my gauges to my parking light fuse if I remember correctly. I didn't want to tap/splice into other wires and this was the easiest way to do so. Just make sure you've got good contact with the metal foot parts of the fuse and it should work. Also if there's another pure black wire, which is your ground wire you've got to secure it to a metal frame in your car. Look right above your pedals under the steering wheel, there's plenty of metal to ground it to up there.

 

thank you very much, i can now see my feet while i drive