Recent pics of my 5th gen... 56k, good luck
These are a few weeks old, only difference now, is the exhaust, i replaced the Tanabe Racing Medallion, with a GReddy EVO.. (tanabe is for sale by the way...) enough talk, heres the pics...
http://www.digitalpose.com/mbr/1/177...9439326_vl.jpg http://www.digitalpose.com/mbr/1/177...6995540_vl.jpg http://www.digitalpose.com/mbr/1/177...8184357_vl.jpg http://www.digitalpose.com/mbr/1/177...1048773_vl.jpg http://www.digitalpose.com/mbr/1/177...1660973_vl.jpg http://www.digitalpose.com/mbr/1/177...5745059_vl.jpg http://www.digitalpose.com/mbr/1/177...0800886_vl.jpg |
:cool: but the side hangs waaay lower than the rear... looks awkward. also, theres a seam around ur lic. plate holder. no pics of the fmic?
|
yea, it does seem to be lower, and it is, but that is actually the matching side skirts to the rear bumper, both are VIS combat
I am not boosted, I now Have a fully N/A built H22 with a kick of nitrous in its veins... |
cool paint job and car
|
very nice. i haven't seen you around though
|
Originally posted by dantastic no pics of the fmic? |
here is a mostly updated mods list...
Mods: Exterior: -Vis Combat rear bumper (molded to body) -Vis Combat side skirts (molded to body) -Vis Invader front bumper (for sale) -Vis OEM style carbon fiber hood -jdm style headlights -custom paint job (gunmetal w/ custom metallic red honda racing wing graphic) -shaved door handle trim -shaved pillar line -shaved trunk lid trim -modified stock taillights Interior: -Momo Millineum steering wheel -Momo racing pedals -Momo polished aluminum/leather e-brake -Momo Air leather/aluminum Race shift knob -Momo shift boot -Momo E-brake boot -Honda S2000 black leather seats -Gauge bezel, brushed aluminum w/ chrome rings -Legend 5 brushed aluminum dash trim kit (STILL sitting in my garage) **will soon be dying various interior pieces black, as well as leather wrapping some Engine/Performance: -h22a1 -5spd conv. -BASZ Stage II Ported and Polished head -ACT stage 2 clutch -Skunk2 stage 1 camshafts -Skunk2 cam gears -Skunk2 retainers/valve springs -Ferrea valves -Type S pistons -Euro R intake manifold (sitting in my room) -Walbro fuel pump -AEM fuel rail -AEM fuel pressure regulator -MSD Sports Compact Ignition w/ rev limit control -MSD Blaster coil -MSD spark plug wires -NGK platinum plugs -VAFC on p72 ecu (gsr) -AEM CAI -JG Edelbrock 65mm throttle body -DC Sports ceramic header -Random Technology hi-flow cat -GReddy EVO cat-back exhaust -GReddy overflow catch tank -Zex nitrous kit (not currently connected to new engine) -worthless addons, DC Sports oil cap, Red valve cover **soon to add** AEM pulleys, Erick's Racing ECU (p28) Suspension/Rollers: -DC Sports front upper strut bar -DC Sports rear lower tie bar -Eibach Sportline Springs -17" Tenzo-R Shu-4's wrapped in Falken tires (215/45/zr17) (For Sale soon as well) -koni adjustables System: -Alpine H/U -The rest is out of car, getting fabricated/upgraded NOTE: if you Cincy folks could keep my mods on the DL, it would be appreciated. :) |
Nice man looks good:)
|
What didn't you like about the Tanabe??
how much are you selling it for? -Sun p.s- Nice ride BTW |
Yeah, why are you selling the tanabe? I have it on my 96 accord. and it is the best sound ever. Not very loud at all. But I love you car looks good! :thumbup:
|
Nice would look so much better all gunmetal without that graphic on the side.
|
damn sweet ride :thumbup: I remember when you had your huge wing on the back... looks oh so much better now
|
Im selling the Tanabe for a few reasons, i only meant to buy it for temporary use, until the GReddy came in, because even though the tanabe is a great system, the GReddy is much quieter, the only way to make hte Tanabe quieter, is with the baffle, and I lost 21 horses to the wheels with the baffle in (tested it on the dyno). I may lose a couple hp with the GReddy EVO, but the quieter ride makes me happy.
as far as selling price, PM me an offer, im willing to bargain, and let it go cheap....:) |
So you haven't got the GSR ECU in that beater yet? Goddamn, and that Euro-R mani still hanging around, you're not being lazy are you? Haha! Naw, fa real, nice ass car as usual, I just wish I could see it and feel its power in person. 1 luv! :D
|
Nice ride man, good paint job and rear end looks clean without a spoiler:thumbup:
|
like already said... why is there a seam where the license plate insert piece was?
|
I like your lights... I dont like the graphic tho, and I don't like body kits. Either way its nice.
|
Type-R Grille!
|
Originally posted by GotBoost? Im selling the Tanabe for a few reasons, i only meant to buy it for temporary use, until the GReddy came in, because even though the tanabe is a great system, the GReddy is much quieter, the only way to make hte Tanabe quieter, is with the baffle, and I lost 21 horses to the wheels with the baffle in (tested it on the dyno). I may lose a couple hp with the GReddy EVO, but the quieter ride makes me happy. as far as selling price, PM me an offer, im willing to bargain, and let it go cheap....:) Latz |
i thought u were getting a new front end?
|
oh yeah
and can i have your seats??? :D |
impressive engine mods!!! What are you 1/4 times? You must be able to smoke anything at the track with the N2O, if and when you hook it back up.:bowdown: :thumbup: :bowdown:
|
lookin nice down by the river man. are you still rolling with BASZ? looking good man. last time i saw your car was over the summer at D&B's.
|
how power are you putting to those wheels?
|
Originally posted by GotBoost? here is a mostly updated mods list... Mods: Exterior: -Vis Combat rear bumper (molded to body) -Vis Combat side skirts (molded to body) -Vis Invader front bumper (for sale) -Vis OEM style carbon fiber hood -jdm style headlights -custom paint job (gunmetal w/ custom metallic red honda racing wing graphic) -shaved door handle trim -shaved pillar line -shaved trunk lid trim -modified stock taillights Interior: -Momo Millineum steering wheel -Momo racing pedals -Momo polished aluminum/leather e-brake -Momo Air leather/aluminum Race shift knob -Momo shift boot -Momo E-brake boot -Honda S2000 black leather seats -Gauge bezel, brushed aluminum w/ chrome rings -Legend 5 brushed aluminum dash trim kit (STILL sitting in my garage) **will soon be dying various interior pieces black, as well as leather wrapping some Engine/Performance: -h22a1 -5spd conv. -BASZ Stage II Ported and Polished head -ACT stage 2 clutch -Skunk2 stage 1 camshafts -Skunk2 cam gears -Skunk2 retainers/valve springs -Ferrea valves -Type S pistons -Euro R intake manifold (sitting in my room) -Walbro fuel pump -AEM fuel rail -AEM fuel pressure regulator -MSD Sports Compact Ignition w/ rev limit control -MSD Blaster coil -MSD spark plug wires -NGK platinum plugs -VAFC on p72 ecu (gsr) -AEM CAI -JG Edelbrock 65mm throttle body -DC Sports ceramic header -Random Technology hi-flow cat -GReddy EVO cat-back exhaust -GReddy overflow catch tank -Zex nitrous kit (not currently connected to new engine) -worthless addons, DC Sports oil cap, Red valve cover **soon to add** AEM pulleys, Erick's Racing ECU (p28) Suspension/Rollers: -DC Sports front upper strut bar -DC Sports rear lower tie bar -Eibach Sportline Springs -17" Tenzo-R Shu-4's wrapped in Falken tires (215/45/zr17) (For Sale soon as well) -koni adjustables System: -Alpine H/U -The rest is out of car, getting fabricated/upgraded NOTE: if you Cincy folks could keep my mods on the DL, it would be appreciated. :) :jawdrop: :drool: my eyes are filled with stars |
Originally posted by honda530 Nice man looks good:) |
nice ride feeling the mods :drool:
|
All times are GMT -8. The time now is 07:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands