Engine and Tranny Swap Trouble Acura CL to 99' Accord
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    May 2017
    Location
    Landrum SC
    Posts
    2

    Engine and Tranny Swap Trouble Acura CL to 99' Accord

    I bought a 99 Honda Accord V6 3.0 and the Tranny was bad and motor had over 300k Miles so I bought a swap from WHAT I THOUGHT WAS A 99' HONDA ACCORD ended being a Acura CL 3.0 V6. We dealt with all obstacles with the wiring harness so far and if I understand right there is an electrical component on the back of the tranny that doesn't match up! I NEED HELP ASAP!

  2. #2
    Senior Member ChrisS's Avatar
    Join Date
    Dec 2004
    Location
    San Jose, CA
    Posts
    330
    maybe, try http://www.rywire.com

    take care,
    ChrisS

  3. #3
    Junior Member
    Join Date
    May 2017
    Location
    Landrum SC
    Posts
    2
    Hey thanks for the help what am I looking for?

  4. #4
    Senior Member ChrisS's Avatar
    Join Date
    Dec 2004
    Location
    San Jose, CA
    Posts
    330
    Contact them.
    Tell them what you have that differs from original equipment in the car.
    Sent pictures to them.
    Maybe, they can do a custom wiring harness patch or tell you what will work.

    Take care,
    ChrisS

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.