Hey, i hated the look on the exhuast tips so i decided to change them and add a little bling to it. enjoy!

 

Uhhh maybe I am missing the point here but cleaning your tips doesn't make it custom...or did I miss part of the post?

 

thrs a part in the middle that i removed from the stock one. you probably cannot see it in the photo attached but u should know if u have an ex.
its like a part that holds the tip in place or something. you should know what i mean.

 

OK I have a DX and have never had the stock exhaust on...might have to go take a look at my wagon to see it

 

You should do this too, looks hella sweet!

 

how'd you do it?

and did you have to cut the "pipe's" shorter on muffler?

facing Back of car-> =[||]----- [TEXT MUFFLER]
the "=" part

 

what i did was clamped it down with the tip part upwards. Used a demel w/ cutting bit to make slots (maybe 7 slots), then put the dremel tool into the hole and started to cut upwards. Each of the pieces were cut off and use a grinding bit to ground down the sides so that it is level with the sidewall. Then i bead blasted the inside to remove any carbon or marks from the bit to make it look cleaner. Used mother aluminum/mag polish to make it look pretty. its kinda hard to explain, i wish i had pictures.
and yes i did cut the muffler shorter by about 3 inches, has a different sound also!

 

i hope you don't mind, i edited down your attachments. your Citibank credit card was visible in the background on 2 pics.

 

lol, wow good eye.
thanks!

 

Sound's Different? Like How?