Ordered my suspension stuff, need advice
 

So yesterday I ordered all my suspension parts:

KYB AGX Shocks
Neuspeed Sport Springs
Progress Camber Kits

Once it all arrives I'm gonna put it all on during the christmas break sometime. I'll post some pics when I have it finished. My question was, what setting do you guys have your shocks on? I have a 5th gen coupe, and noticed many people on here with 5th gens use the AGX shocks. What's good for an agressive daily drive, and whats good for when you want all out performance?

2 front, 4 rear

try searching around, you'll find some better answers

drive it around and see which settings you like...isn't too hard to adjust them so experiment...mines on 3/6

havent messed with them. But I beileve mine are on 4 front, 4 rear.

You should think about lowering ur front some. Having a high back and low front reduces understeer.

On my tokicos i use 3/5 (out of 5) and once I used 1/5 on auto-x and the cars ass was very loose. I tapped the e-brake on a 90deg turn and instantly became perpendicular to the lane I was traveling in. :fawk: After u change the setting make a few fast/hard/safe turns in a parking lot or some safe place so u know what ur car wants to do.

drmmrboy87, I have the same setup as you since july, just without the camber kit. I have mine set to 2f/5r. It's stiff, handles well, but okay for everyday driving. 6 rear is a little too harsh for me.

As i recall when i researched, front goes by percentages 1= 100% (stock stiffness) 2 = 115% stiffer(so 15% more than stock) 3 = 132% 4 = 152%. And the rear goes by just increments of 1-8.

sounds good to me, I'll probably run it like that for a while.

I used to have Neuspeed Sports springs, the drop looks nice. But the ride was a little too bumpy for me.

i run mine on 4/8 because if i don't i bottom out all the time. :sqfawk: maryland roads:mad: