Notices

I need help on accord 01 keyless programming

Thread Tools
 
Old Dec 8, 2003 | 11:46 AM
  #1  
watercourt's Avatar
watercourt
Thread Starter
Junior Member
 
Joined: Dec 2003
Posts: 1
Likes: 0
Default I need help on accord 01 keyless programming

Does anyone know how to program a 2001 accord keyless remote? I just bought this used car with no remote, I got one used on Ebay. I did a search all over and could not find any instruction on how to program a 2001 accord. Please help! Thanks!
Reply
Old Dec 8, 2003 | 01:14 PM
  #2  
JimBlake's Avatar
JimBlake
Senior Member
 
Joined: Jan 2003
Posts: 1,994
Likes: 2
Default

The only method I've seen is when you already have at least one remote. But here goes...

1) Unlock Doors
2) Turn ignition key to "ON" position (II)
3) Press the "LOCK" or "UNLOCK" button on the remote
4) Turn the ignition key to the "OFF" position (0, I)
5) Turn the ignition key to the "ON" position
6) Press lock or unlock
7) Turn key to off position
8) on position
9) lock or unlock
10) off position
11) on position
12)lock or unlock - doors should cycle to indicate successful programming. If you only have one remote, turn ignition to off or don't touch anything. if you have 2+ remotes, go to 13:
13) lock on each transmitter that you need to program

*Steps 2-12 must be performed within 5 seconds of each other. Step 13 can be performed within 10 seconds of step 12.


You could try using the lock/unlock button on the door in place of the remote, until you get to step 12 or 13. I have no idea whether that'll work...
Reply
Old Dec 8, 2003 | 02:01 PM
  #3  
MeiSoSlow's Avatar
MeiSoSlow
WEEEEE!!!!!
 
Joined: Oct 2002
Posts: 842
Likes: 0
From: At Red Line!
Default

eh.. you want to make sure your car has the keyless remote entry option on it first.... Sounds kinda stupid, but doesn't hurt to make sure ya know.
Reply
Old Jun 18, 2012 | 06:00 PM
  #4  
milksteak's Avatar
milksteak
Junior Member
 
Joined: Jun 2012
Posts: 2
Likes: 0
From: Charlotte, NC
Default

My toddler screwed up my remote by pushing the buttons a bunch of times today. Seemes harmless, but when i went out to the car afterwards the lock/unlock/trunk buttons wouldnt work. Can I reset my existing remote with this procedure-without buying a replacement one first?
Reply




All times are GMT -8. The time now is 02:46 AM.