Inner Tie Rod
Guest
Posts: n/a
go to a reputable alignment place, if they can not align it, then they'll be able to give you an idea of what is out wack. Unless you've wrecked the car or hit any nasty holes lately, shouldn't be anything bent.....just get the alignment check.
- Nathan
- Nathan
Older Honda Fanatic
Joined: Jul 2002
Posts: 3,154
Likes: 0
From: Adirondacks of NY
Unless its bent... it should be ok..... your car probably just needs an alignment.... if you do replace the inner tie rod, you'll need an alingment afterwards anyways.
The inner tie rod is just a metal rod with a ball joint on the end... theres nothing to really go bad on them.... the OUTER tie rod ends are what usually go bad.
The inner tie rod is just a metal rod with a ball joint on the end... theres nothing to really go bad on them.... the OUTER tie rod ends are what usually go bad.
Thread Starter
Member
Joined: Apr 2003
Posts: 59
Likes: 0
From: NE
Yeah, I had an accident, and this bodyshop did everything else fixed, then I just noticed that my car was pulling to left. I went back there, and they checked, and told me it's Inner tie rod. They quoted $300, would dealer cost more than that?