|
GReddy Turbo'd Si...dyno graph + vids inside...
https://www.dslextreme.com/users/turbo_si/sirun5.jpg
My boost controller didn't work or I would've tuned for 7psi. =( :thumbdown: What do you guys think of the numbers? GReddy Turbo Kit at 5psi --> 4.5psi 2.25" --> 2.5" custom downpipe Aftermarket cat --> 2.5" custom exhaust piping with Magnaflow muffler from MKteller Hondata 3b with P28 ECU 440cc injectors I believe that's all of it. Bombs away! :P Video #1 Video #2 More boost needed! :D |
that's pretty good for a 5 psi run, but i yet again prove my point. With 190 something whp you're still at 140 something torque. My D series put down 173 torque to go with the 176 whp, and i'm not even tuned on hondata just the afc hack with a dead clogged up cat. Also you're only putting out a lot of power top end, i bet even on 7 psi it's gonna take you till 6500 rpms to make more power than me.
I raced a pistons/rods/sleeved fully built 00 si with the greddy kit on 13 psi and it took him till 90 mph to catch me. Once he spooled up at the top of third he RIPPED me though. |
Yeah...torque sucks on the B16 :( But it is a nice increase from stock. :p
I believe I saw that video of the race between you and the Si...SRT-4 too right? |
Originally posted by FBP Si 2000 Yeah...torque sucks on the B16 :( But it is a nice increase from stock. :p I believe I saw that video of the race between you and the Si...SRT-4 too right? |
Originally posted by FBP Si 2000 Yeah...torque sucks on the B16 :( But it is a nice increase from stock. :p I believe I saw that video of the race between you and the Si...SRT-4 too right? yep that was me...that SRT4 had some balls, i raced one the night before and i pulled it about 3. I think this one was fully broken in with a better driver that was actually driving it hard. But yeah did you see how in 1st the si disapeared from the screen and then came roaring back top end? |
Originally posted by Jkan2001 yep that was me...that SRT4 had some balls, i raced one the night before and i pulled it about 3. I think this one was fully broken in with a better driver that was actually driving it hard. But yeah did you see how in 1st the si disapeared from the screen and then came roaring back top end? |
i wanna see it too!!!!
|
http://home.attbi.com/~preludelc4/jkanturbosisrt4.wmv
on the 2nd race with the SRT4, i started too low and behind him so he got a little bit of a jump on me. We were pretty much even all the way to 120. But as you can see the SI has a really bad powerband and no torque, it takes him till he's around 7000 rpms in 3rd where he starts pulling trains on us darn that 276 whp topend |
|
thats a cool vid bro, got another one of you?...lol
|
| All times are GMT -8. The time now is 11:57 AM. |
© 2026 MH Sub I, LLC dba Internet Brands