can someone help me out. i just bought some halo projector lights and have no clue how the wiring goes. It didn't come with any instructions. Me and none of my freinds can figure it out.

 

here are some intructions
send them back
buy jdms

 

what year, noob? some details are nice.

 

1998 honda civic coupe. there are a couple wires i have no clue to where they go to

 

I'll help you, but before I do:

you and your friends are idiots.

now then, there are 2 wires comming from where the angel eyes are. One is black, another white. When I installed my projectors, I ran those wires to the corner bulb area. There should be 3 wires in that area: One is the ground, another constant power, and a third intermitet (sp h: ) power whenever the blinker is thrown. Using a test light, determine which one is constant (I can't remember the color). The ground is black, and in the middle, I beleive. Now, tap the wires from the angel eyes to the corner wires, making sure the red wire (should have a fuse) goes to the constant power and the black goes to the ground.

good luck. sounds like you'll need it.

 

I jsut instaled halos on my 92 lude. but the brights are stuck on? I've double check my wires,all seems right. but then I had no instructions to go by.
and suggestions?

 

here is the wiring diagram if u need to figure out which wires go to where
CLICK TO DOWNLOAD FILE

mods/admins please edit out the link if its not permitted

 

Here are some more inStructions:
If you don't have anything constructive to say, don't say it.
I know I don't care what you think, and chances are neither does he. h:

 

I actually have a question... I just signed up looking for a car alarm install but found this which brought up another question, the kid I bought my 96 civic off of had those angel eye projector pos lights and I ripped them out and put the stock ones in but when I turn on the headlights nothing happens... I replaced the bulbs and tried everything I could (being a noob) can anyone help me out. I'm dying with those things on.