Notices

Plugs for spayin civic

Thread Tools
 
Old Apr 11, 2003 | 05:25 PM
  #1  
ImprtRcr02's Avatar
ImprtRcr02
Thread Starter
Registered User
 
Joined: Mar 2003
Posts: 15
Likes: 0
From: Anderson, SC
Default Plugs for spayin civic

If anyone could tell me the stock plug gap for a 93 civic ex. It's amazing how not one adavance auto around here doesnt have a haynes manual, and the factoy manual did not come with the car, and the hood is missing the stickers (yes its been wrecked). I am going to gap them smaller but I need to know the stock gap first. So if anyone knows please let me know. Thanks
Reply
Old Apr 11, 2003 | 09:21 PM
  #2  
Spood's Avatar
Spood
Sucka
 
Joined: Oct 2002
Posts: 1,397
Likes: 0
From: Fridley, MN
Default

Stock gap should be 0.43 according to my Helms manual.
Reply
Old Apr 12, 2003 | 07:42 AM
  #3  
oc_civic's Avatar
oc_civic
mcc racing
 
Joined: Jun 2002
Posts: 3,264
Likes: 0
From: Southern New Jersey
Default

what size shot.. may i recomend colder plugs..
Reply
Old Apr 12, 2003 | 09:12 PM
  #4  
ImprtRcr02's Avatar
ImprtRcr02
Thread Starter
Registered User
 
Joined: Mar 2003
Posts: 15
Likes: 0
From: Anderson, SC
Default

Thanks, yeah i have colder plugs (1 step) but im also going to gap them smaller. It's really for my friends car, I have an accord on juice as well...
Reply
Old Apr 13, 2003 | 12:50 AM
  #5  
Bakeoff's Avatar
Bakeoff
wooooo woooooooooo
 
Joined: Mar 2002
Posts: 3,134
Likes: 0
From: Twin Cities
Default

Originally posted by Spood
Stock gap should be 0.43 according to my Helms manual.
werd. :thumbup:
Reply
Old Apr 13, 2003 | 10:10 AM
  #6  
ImprtRcr02's Avatar
ImprtRcr02
Thread Starter
Registered User
 
Joined: Mar 2003
Posts: 15
Likes: 0
From: Anderson, SC
Default

Anybody figure what times he should be running? He has an intake and exhaust only (2 door) and he ran a 16.4 on motor the other week. I think he should be around low 15's IMO, he's running about an 80 shot on it right now. Anyone else have any opinions or have similar cars with this set-up?
Reply
Old Apr 14, 2003 | 11:01 AM
  #7  
oc_civic's Avatar
oc_civic
mcc racing
 
Joined: Jun 2002
Posts: 3,264
Likes: 0
From: Southern New Jersey
Default

Originally posted by ImprtRcr02
Anybody figure what times he should be running? He has an intake and exhaust only (2 door) and he ran a 16.4 on motor the other week. I think he should be around low 15's IMO, he's running about an 80 shot on it right now. Anyone else have any opinions or have similar cars with this set-up?
how can you run "ABOUT" an 80 shot


drilling your own jets?
Reply
Old Apr 14, 2003 | 02:58 PM
  #8  
ImprtRcr02's Avatar
ImprtRcr02
Thread Starter
Registered User
 
Joined: Mar 2003
Posts: 15
Likes: 0
From: Anderson, SC
Default

No, just bought a little bit bigger nitrous and fuel jet. He has a nitrous expess system and a 75 shot is a 41/24 setup. we got some jets and are running a 43/25. One of my friends owns his own shop and his (sorry for saying ith: ) camaro runs in the 11's. He has dealt with nitrous for a long time and we have had no probs so far... And just yesterday (I was driving... ) we busted a Z28 at a red light :fawk: We talked to him afterwards and he was dumbfounded, it was a pretty close race but nonetheless we won.
Reply




All times are GMT -8. The time now is 02:45 PM.