Engine is in and I'm close to cranking but.....
 

We'll tonight I finally got the engine in and plugged in. I bleed the clutch and it was finally that BIG moment. I turned the key and fuel starting fountaining out of the top of the fuel filter. I had forgotten the bolt that goes into the top. :) Then I go to crank it again and again nothing happens. The starter is turning the crank but the engine isn't sparking. I pushed on top of the fuel rail and the injectors and theres a leak. I know it isn't the cables or nething electric. Whats this cause of the injectors doing this. Could it be a bad fuel rail or injectors thats keeping me from starting? The HANS wasn't much of a help. Thanks and I'll have pics as soon as its cranked. :thumbup:

umm did u put the injector seals bakk in properly? cuz it might not of sat properly hence the leak. recheck those.

late

I never took the injectors out nor the fuel rail. Could the injectors just have a bad seal. If so wouldn't the engine still crank even though theres a small leak in them? I'm just trying to trobleshoot.

hmm, try to check em anyways. could be a bad injector or seal.

late

Could it be something else other then that too maybe.....my wires, distrubor, etc...?

there is or isn't spark?

no spark

^^^bumpy de bump^^^

Check your coil? Are your plugs fouled?

if there's no spark, that has nothing to do with the fuel rail. You can check the coil and ignitor with a multi meter.