need help with wheel studs

Reply Subscribe

Thread Tools

Nov 25, 2006 | 10:29 PM

darkskyracing

Thread Starter

Member

Joined: Dec 2005

Posts: 55

Likes: 0

From: Sactown, California

need help with wheel studs

does anyone know how to get the wheel studs out of a 98 civic coupe and put the new ones that i have in. i already have the studs and i have the rotor off but i need to know how to get the hub off. any help greatly appreciated. thanks

Nov 26, 2006 | 04:02 AM

teg92

WHAT OK YEAH!

Joined: Sep 2003

Posts: 5,565

Likes: 0

From: overthere

i think you have to remove the wheel bearing to get the studs out

Nov 26, 2006 | 01:02 PM

Fuse

Senior Member

Joined: Oct 2006

Posts: 1,335

Likes: 1

You might be able to sneak it by.Usually you have to remove the hub and you would need a pres for that.

Nov 26, 2006 | 01:19 PM

civicburner

Senior Member

Joined: Jun 2003

Posts: 420

Likes: 0

From: Albany,NY

I've taken wheel studs out before by smacking them out with a hammer. But that was on the rear. You'll probably screw up your alignment doing it on the front.

Nov 26, 2006 | 04:30 PM

G-M-W

Senior Member

Joined: Aug 2003

Posts: 2,157

Likes: 0

From: Akron, Ohio

i think they need to be pressed out....i just took it to the gas station at the corner...was like $12

Nov 28, 2006 | 07:00 AM

EGROM960

EG6...

Joined: Sep 2006

Posts: 69

Likes: 0

From: White Plains

im better sure you just bang them out with a hammer on the side which sticks out....thats howi took mine out...no damge at all but see i have a 92 civic...i dont no if that helped.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump