clutch slipping? Replacement costs?
I left my car sitting up hill for about 2 days, and now the clutch engagment is really early, the peddle feels like it is sticking a little and is slow to return once i push it in.
would a Exedy clutch kit be all that I would need? EXEDY Pressure Plate EXEDY Clutch Disc Release Bearing Pilot Bearing Alignment Tool How difficult would it be to replace? How much should I expect a shop to charge for replacing it? (im in gainesville fl) Im in a 92 Civic HB that was swaped (several years ago) with a b16a and went from Auto to manual, so I don't know where my clutch parts came from. So if this kit is a replacement, then do I just need one for my engine type? |
How to: https://www.honda-acura.net/forums/s...d.php?t=139802
You will need the kit for the engine, not for the car. Exedy makes a good kit and the items listed will be all that you need. |
Originally Posted by bleach
(Post 3209494)
I left my car sitting up hill for about 2 days, and now the clutch engagment is really early, the peddle feels like it is sticking a little and is slow to return once i push it in.
would a Exedy clutch kit be all that I would need? EXEDY Pressure Plate EXEDY Clutch Disc Release Bearing Pilot Bearing Alignment Tool How difficult would it be to replace? How much should I expect a shop to charge for replacing it? (im in gainesville fl) Im in a 92 Civic HB that was swaped (several years ago) with a b16a and went from Auto to manual, so I don't know where my clutch parts came from. So if this kit is a replacement, then do I just need one for my engine type? Where do you live at. Maybe I could be of some assistance. |
check your clutch master and clutch slave cylinder.
|
the shop that was going to do mine told me 350, so i decided to do it myself. it wasnt that hard. you need some special sockets for the pressure plate but thats about it
|
If you have any decent tools, it's not really a special socket, just a 12 point 10mm socket for the clutch PP and a 17mm 12 Point socket for the flywheel bolts.
I did my first clutch with my mechanic, (mainly me doing most of the work, but I have done numerous since then.) I can do it with my eyes closed now. |
All times are GMT -8. The time now is 06:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands