Engine Swap Resources Thread - Under Construction
#21
3 Piece Suit
Join Date: Sep 2008
Location: Granite Bay, CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Clutch options for Tranny
This is my first post on HAN.
If you were swapping a B18B1 into an EG, but wanted to install a B16A/B16B Tranny, would you run the B18 Clutch or B16 Clutch?
If you were swapping a B18B1 into an EG, but wanted to install a B16A/B16B Tranny, would you run the B18 Clutch or B16 Clutch?
#26
Cheapest Motor Swap
I've have a 98 civic LX with no motor and was wondering what the other D-series options I have are that would bolt right in using the same everything like transmission and what not. For example would a D15B8 fit? I could understand changing the intake manifold so OBDII wouldn't be affected, but I am broke and need to get this running asap for as cheap as possible and was wondering what my options are so I can find a cheap motor and throw it in. Thanks in advance!
#27
I'm new to the forum. I've got a ek, and the motor threw a rod. I'm in the process of removing the old egine. My host tranny I know is good. The donor motor I purchased came with a tranny and removed it from the donor motor. My question is can I pull the blown motor without pulling the transmission out of the car replace it with "newer" motor?
Last edited by EXChris401; 03-18-2015 at 11:47 AM. Reason: I wasn't finished, stupid phone
#28
93 delsole b18b swap
A friend of mine has a 93 delsole obd1 and hes trying to swap a b18b in it. Just wondering how the wiring would end up. Its a obd1 with the ecu and the b18b is a obd2. Wat harness do i need for this swap?
Thread
Thread Starter
Forum
Replies
Last Post