Hey guys, I'm looking for a wiring schematic for both the alternator and distributer for both OBD1 and OBD2 so I can splice my OBD1 harnesses to my OBD2 wiring. Any help would be greatly appreciated.

Thanks
Josh

 

Alt:
OBDI |OBDII
black+ yellow | black+ yellow
white + blue | white + blue
blue |white + red
white + yellow |white + green
(If you don't have the harness ends for both, you cant do this - you need that or a different alternator)

Dizzy:

 

Thank you very much for that information. You are a life saver!!

Josh

 

Ok, I got most of the way through the cross-over but I ran into a little snag.

On the OBD2 harness there is only 8 wires and you have 9 listed. On the OBD1 harness there isn't a green wire instead it's orange/blue. The OBD2 harness has only one blue wire and it matches up to the blue/green wire. Also, I was wondering what the blk/yellow wire does.

Thanks
Josh