Notices

JDM 4 door integra spoiler suggestion

Thread Tools
 
Old Dec 22, 2004 | 11:41 AM
  #1  
proper~teaze's Avatar
proper~teaze
Thread Starter
Registered User
 
Joined: May 2003
Posts: 12
Likes: 0
From: california
Default JDM 4 door integra spoiler suggestion

Sup yall, any ways i bought this OEM JDM spoiler from japan and the guy that sold it to me claim it was for an 4 door JDM ITR...but when i got it it was smaller (it didn't fit right in the holes, and yes i put it in the right holes), and i have a strong reason it was for the DC2 ITR 2 door (does anyone know if the the JDM 4 door ITR is slightly smaller then the USDM?)...now i'm stuck with it...but a lot of my friends says i shouldn't go with the OEM spoiler and go with the racing wings...but i dont know what kind looks best on a 4 door...what do you guys think...should i drill new holes, or buy another 4 door OEM ITR spoiler or should i buy a new racing wing and sell my OEM spoiler that didn't fit...holla back at me quick cuz my JDM conversion is already in finishing progress...
Reply
Old Dec 22, 2004 | 11:50 AM
  #2  
alphaxxn's Avatar
alphaxxn
4500rpm hesitation
 
Joined: Jun 2003
Posts: 4,374
Likes: 0
From: Hesperia
Default

Originally Posted by proper~teaze
Sup yall, any ways i bought this OEM JDM spoiler from japan and the guy that sold it to me claim it was for an 4 door JDM ITR...but when i got it it was smaller (it didn't fit right in the holes, and yes i put it in the right holes), and i have a strong reason it was for the DC2 ITR 2 door (does anyone know if the the JDM 4 door ITR is slightly smaller then the USDM?)...now i'm stuck with it...but a lot of my friends says i shouldn't go with the OEM spoiler and go with the racing wings...but i dont know what kind looks best on a 4 door...what do you guys think...should i drill new holes, or buy another 4 door OEM ITR spoiler or should i buy a new racing wing and sell my OEM spoiler that didn't fit...holla back at me quick cuz my JDM conversion is already in finishing progress...

Most likely because your putting it on a civic supposedly?

Try the integra forums..
Reply
Old Dec 22, 2004 | 11:59 AM
  #3  
Nelson's Avatar
Nelson
Administrator
 
Joined: Jul 2002
Posts: 56,734
Likes: 3
From: NY
Default

Sell the spoiler, as it will be in high demand, and locate a true 4dr spoiler, given that you have an Integra. More than likely, you need to re-drill holes anyway.
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX
- SOLD
EG Ferio - SOLD

FA Ferio - Returned
www.NelsonLee.net



Reply
Old Dec 22, 2004 | 12:39 PM
  #4  
MahoneyL80's Avatar
MahoneyL80
I want 2 B cool like u!
 
Joined: Oct 2004
Posts: 996
Likes: 0
From: dont you wish
Default

Originally Posted by Max Windu
More than likely, you need to re-drill holes anyway.
like he said, you will have to drill new holes. the ITR spoiler isnt going to fit or sit in the same exact place as a stock spoiler. just like on my g/fs civic, she had holes from her small spoiler, when i put on the SI spoiler i had to drill new holes because it sat a little farther back on the trunk, and the screws were more inward then towards the edge. should be the same concept on the integra since they are basically the same
Reply
Old Dec 22, 2004 | 05:15 PM
  #5  
proper~teaze's Avatar
proper~teaze
Thread Starter
Registered User
 
Joined: May 2003
Posts: 12
Likes: 0
From: california
Default

so to clear things up...even if i did have the OEM 94-01 4 door ITR spoiler from japan...it wont fit exactly on my 94-01 4 door Integra USDM...i still have to drill new holes no matter what correct? What do you guys suggest though...go with OEM or After market racing wings (like the aluminum wings), if after market racing wings...which kind, type, where to find etc...
Reply
Old Dec 22, 2004 | 05:20 PM
  #6  
bluetwo's Avatar
bluetwo
Relevance is irrelevant
 
Joined: Jun 2004
Posts: 6,079
Likes: 0
From: Honolulu, HI
Default

OEM > Aftermarket racing wings.

I don't know, sell it and buy another maybe...
Reply
Old Dec 22, 2004 | 05:50 PM
  #7  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

Originally Posted by proper~teaze
so to clear things up...even if i did have the OEM 94-01 4 door ITR spoiler from japan...it wont fit exactly on my 94-01 4 door Integra USDM...i still have to drill new holes no matter what correct? What do you guys suggest though...go with OEM or After market racing wings (like the aluminum wings), if after market racing wings...which kind, type, where to find etc...
there is an integra forum you know? :eh:
Reply
Old Dec 22, 2004 | 07:56 PM
  #8  
racerdave's Avatar
racerdave
USAF C-17 Crewchief
 
Joined: Feb 2003
Posts: 1,068
Likes: 0
From: Washington
Default

Integra lookin for advice in Civicland, interesting....

Anyhow, please donot ruin your jdm conversion by puting a tanning bed on your trunk... Thoes aftermarket aluminum wings are the most retarded thing in the car world, so many people have them, and so many cops love them, it makes you easyer to spot, it atracts atention, and makes your car look rice, instead of nice.

If I were you I would go to some local speed shops and see what they charge for a good lookin aftermarket spoiler. Also you can browse online, its all a matter of what you want, they have aftermarket spoilers that fit stock holes, and look almost stock.
Reply
Old Dec 22, 2004 | 09:27 PM
  #9  
MahoneyL80's Avatar
MahoneyL80
I want 2 B cool like u!
 
Joined: Oct 2004
Posts: 996
Likes: 0
From: dont you wish
Default

look at it this way, wings serve no purpose unless your doing 200mph+ get a stock ITR wing or stock GS/LS wing and you will be straight
Reply
Old Dec 22, 2004 | 09:35 PM
  #10  
proper~teaze's Avatar
proper~teaze
Thread Starter
Registered User
 
Joined: May 2003
Posts: 12
Likes: 0
From: california
Default

i know this is the civic forum but i will like advice from all honda and acura lovers and i also had post a thread in integra forum as well...
Reply



All times are GMT -8. The time now is 01:17 PM.