I notice that my exhaust is pushed back about 2 inches when i put in my stock cat in. This causes my rear sway bar to hit my exhuast. Is there a difference b/t a coupe header and a hatchback one?? The exhasut is a SP2 for a 92-95 hatchback. Could it be i have the wrong header and that would trhow it off?

 

Can someone please help me???

 

yes the header is the wrong one, the length of the header differs due to the length of the cat. are you running a Z6 cat? if not then you need to get one to fill the gap.

 

Im running a Z6 cat and its too big. Is it that i have a cheap header maybe??

 

the hatch header a-pipe is usually shorter and the b-pipe is usually longer as well.

so are you running a hatch header and z6 piping?

 

THe header is from a 94 EX. BUt all my piping is for the hatch.

 

ya usually the hb piping is shorter than the coupe/sedan. just change out the piping.

 

by pipeing u mean the header right?? The exhaust is for a hatchback.

 

no. by piping i mean exhaust piping the b-pipe that is after the cat and before the muffler.