haha umm...a friend gave me a short shifter for my 95 dx and i dunno how to install it, anyone wanna help me out or juss straight out install it for me? i'll give you a lil bit of cash while ur at it or juss recommend a place for me to get it done. im not too sure if i wanna do it myself but if it seems easy enuf, i will do it myself. im located in the 626/909 area in so. cal. thanks!

 

umm its not that hard just unbolt the shift linkage

 

if you pay for my air fair ill definately go across the country to install your short shifter, just gimmie somewhere to stay and food its really easy to do a shifter. there are 2 bolts on the bottom of the linkage(yes you need to go under the car) and a bolt on the linkage going to the tranny. take those off and its just straight foward from there. just remember to grease up the ball before you put the shifter in.

 

it really is easy as hell, I just did mine and never done it before. 2 bolts holding the socket on and 1 holding the shifter to a rod going to the tranny. remove those 3 and it will drop out. should take like 20min to do

 

alrighty if its that simple...anyone have a diagram/pics or something. any other help would be nice, thanks for everything so far!

 

you can get an exploded digram in any of those books you see at the car parts store. but why not save yourself money and try it. it never hurts to learn something, and like evryone else said its pretty hard to screw up.

good luck

 

The 2 screws holding the linkage are 12mm. I also think the one holding the shifter is 12mm as well.

 

cool. thanks