Originally Posted by
project_hatch
He's saying jack up your tire because you don't want a damn drill bit going through your tire and into your rim, unless of course YOU do then that's your perogative...personally I would take the tire off...Then remove the plastic fender well because it will be in the way. Then simply drill your holes, use 10 mm bolts and put fender washers on the bottom side of it. Put the plastic fender well back on and then the tire and take it off jacks and enjoy the "twisties"
i finished. and he's saying to jack it up so the frame will be evened out. there's more than enough room to drill it without the jacks anyways; unless you're drill bit is super long and you're pushing down hard and not paying attention. i had no trouble with the tire or fender underguard getting in the way so i left it on while doing it.
thanks tho guy
