Neither fan is working. I ran a jump wire to the big one on the passenger side and the motor works. I didn't test the smaller one.

I see the green connectors on the temp switches that has one in front by the exhaust and one and back by the intake manifold. Which one should I test and how?

I have a test light and a wiring kit to make jump leads, I don't have an ohm meter or voltage tester and I'm $orry but I can't buy them. I have to work with what I have. I'll go to the library and get the chilton manual they have there, I have used it before.

I just need to get this fan fixed so it doesn't blow the head gasket again. I just finished putting a new gasket on it and decked the warped head. Now I just need to get this fan going again so it don't happen again.

Thanks everyone for the help.