Notices

need advice

Thread Tools
 
Old 10-02-2003, 04:49 AM
  #1  
lance2020
Junior Member
Thread Starter
 
lance2020's Avatar
 
Join Date: Oct 2003
Location: albany ga
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default need advice

i`m about to sell my teg and i just found out that my 91 teg has a 94 gs motor in it i don`t know alot about imports i`ve raced old chevys most of my life but i do love my teg. could someone please tell me a little bit about what kind of difference the motor swap makes.


thanks lance
Old 10-02-2003, 07:41 AM
  #2  
Daniel
Senior Member
 
Daniel's Avatar
 
Join Date: Apr 2001
Location: Concord, NC
Posts: 8,232
Likes: 0
Received 0 Likes on 0 Posts
Default

GS? Do you mean GSR? Does it say DOHC VTEC on the valve cover? If it does, you're looking at a horsepower increase of 40 HP @ 1600 higher up the power band, and a torque increase of 6ft-lb @ 1200 rpm higher up the power band.

Total output for horsepower is 170 @ 7600 and torque is 128 @ 6200. Oh, and not to mention that if it is the GSR engine (It should say B18C1 stamped on the front of the block, next to the transmission), then that's a very high in demand engine.
Old 10-02-2003, 12:34 PM
  #3  
lance2020
Junior Member
Thread Starter
 
lance2020's Avatar
 
Join Date: Oct 2003
Location: albany ga
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

no it says b18a1 so what does that men
Old 10-02-2003, 09:35 PM
  #4  
93HybridCX
Beast from the East
 
93HybridCX's Avatar
 
Join Date: Sep 2003
Location: VA
Posts: 2,705
Likes: 0
Received 0 Likes on 0 Posts
Default

Its the same motor that came in the car so there is no differnce. I am not shure what year motor it is by the code but I have a feeling that it is the original motor in it.
Old 10-03-2003, 06:25 AM
  #5  
lance2020
Junior Member
Thread Starter
 
lance2020's Avatar
 
Join Date: Oct 2003
Location: albany ga
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

well i had to replace the iac and one for a 91 would not work i had to get one off of a 94 thats why
Old 10-03-2003, 11:47 PM
  #6  
ska32198
Registered User
 
ska32198's Avatar
 
Join Date: Aug 2003
Location: SLC, UTAH!!!
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default

the b18c1 is the VTEC GSR motor the b18a1 is the RS, LS, GS, SE motor that is NON-VTEC




All times are GMT -8. The time now is 08:58 PM.