timing belt drive pully - how to remove?
09-14-2003, 10:04 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2003
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
timing belt drive pully - how to remove?
I'm rebuilding my h22 and not sure how to remove the timing belt drive pulley (not the crank pully outside of the timing cover, but the small gear that drives the timing belt) The service manual does not say. Do I need a puller tool??? Help would be greatly appreciated.
09-21-2003, 09:19 AM
#3
Rice Rocket
Join Date: Mar 2003
Location: Miami, FL
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
After you remove the harmonic balencer everything should slide off easily once the tension is off the balencer belt and timing belts.
I hope you have the special tool for the H22's auto tensioner.
I hope you have the special tool for the H22's auto tensioner.
09-21-2003, 10:06 PM
#4
Junior Member
Thread Starter
Join Date: Apr 2003
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Ya I got it, it just pulled off w/ some penetrating oil. I was worried that it was pressed on, whew.
Ive had the auto tensioner out before and just made the tool out of a bent piece of metal, pretty simple.
Ive had the auto tensioner out before and just made the tool out of a bent piece of metal, pretty simple.