Crazy Ass O2 sensor problem
#1
Crazy Ass O2 sensor problem
I just went over to my friends house and helped him convert his 7wire o2 setup off of his VX harness to a 4wire did everything right and is still throwing a code and is still running rich, does ay body know how to solve this?
P72 ecu
vx harness on a GSR in an EG
P72 ecu
vx harness on a GSR in an EG
#5
i can bring my volt meter over and we can check the continuity on it, but i don't think that it, if the a/f is reading then the o2 has to be gettin power on it then.....
#7
REmember signal wire off the O2 sensor is shielded, it's sensitive to RF interferance.
Check your splices, I used blade connectors in the passenger kickpanel, and had to swap them with butt connectors, fixed some of my codes.
-PHiZ
Check your splices, I used blade connectors in the passenger kickpanel, and had to swap them with butt connectors, fixed some of my codes.
-PHiZ
#8
what is a blade connector?
For the full process of our o2 swap goto:
http://honda-tech.com/zerothread?id=605946
Ugh
For the full process of our o2 swap goto:
http://honda-tech.com/zerothread?id=605946
Ugh
#9
Originally posted by undrgrndhaqer
what is a blade connector?
For the full process of our o2 swap goto:
http://honda-tech.com/zerothread?id=605946
Ugh
what is a blade connector?
For the full process of our o2 swap goto:
http://honda-tech.com/zerothread?id=605946
Ugh
...replied to H-T post.
-PHiZ
#10
Posted the wiring connections on H-T. It has to be the connectors b/c im sure the wiring is correct. Also, re-read this thread. He said because the a/f gauge was getting a reading. Not really. When car is on, the gauge would show half the led spectrum in a fading manner. If I hit the gas, all would get brighter but wouldn't move in an individual led. Get what im saying? It's like its not getting a strong enough reading. ( connection problem maybe?)
Ugh
Ugh