b18b to b18c
08-07-2003, 07:29 AM
#3
Senior Member
Join Date: Sep 2002
Location: Colorado Springs
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
normally - a complete engine is just what it says, complete with all accessories - starter, distributor, alternator, etc. - a long block is the complete block assembly with head and no accessories - usually no intake manifold - a short block is just the block assembly, nothing else
08-07-2003, 04:24 PM
#5
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
First off, what do you mean by "all the other parts"?
Is it a complete longblock (with distributor, intake manifold, exhaust manifold, etc), or just a bare one (only the block and head)?
At bare minimum, you need a B18C intake manifold. The B18B distributor can be modified to work. Use the original mounts.
Is it a complete longblock (with distributor, intake manifold, exhaust manifold, etc), or just a bare one (only the block and head)?
At bare minimum, you need a B18C intake manifold. The B18B distributor can be modified to work. Use the original mounts.
08-07-2003, 08:35 PM
#7
Senior Member
Thread Starter
Join Date: Nov 2002
Location: SE NC
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
btw the "longblock" comes with an Intake Manifold, Exhaust Manifold, Injectors, Fuel Rail, Throttle body, Alternator, and Distributor. would that be everything i need to chang ethe b18b to a b18c (other than the ECU) thanks for the replys.
