How To: Clean Your Throttle Body
#12
Jizz Maste12
Thread Starter
Join Date: Jun 2002
Location: DISNEYLAND!
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
my car was on when i did it and the engine was COLD... after i pure 1/3 of the bottle in to the TB i turned off the engine. Let it set fo 5-6 mins then took a spin around the block then into the street WOT.
#13
Jizz Maste12
Thread Starter
Join Date: Jun 2002
Location: DISNEYLAND!
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
I did my friends 94 accord and when I place the straw into the TB plate it rev the engine to high so what we did was inject the sea foam then start the engine (so the liquid would be sucked into the TB) did that 8 times, then let it sit for 5-6mins. Took a spin on the freeway WOT. could be done both ways
*** just dont pour it liquid all at once into the TB or you'll hydo lock your engine ***
take your time
*** just dont pour it liquid all at once into the TB or you'll hydo lock your engine ***
take your time
#17
Originally posted by Samson
i did this with the STP spray... and my car now has an idle surging problem... dont ask me what caused it... everything is installed correctly.
i did this with the STP spray... and my car now has an idle surging problem... dont ask me what caused it... everything is installed correctly.
You F'd up your MAP Sensor. h:
Some Carb/TB cleaner will mess it up. Is your CEL (check engine light) on?