How To: Clean Your Throttle Body
#1
Jizz Maste12
Thread Starter
Join Date: Jun 2002
Location: DISNEYLAND!
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
throttle body CLEAN
just cleaned my throttle body today for my 6gen accord
You will need:
-Screw driver
-1 can of Sea Foam
-a Can
-a baseter tube or funnle tube
-a straw (from a sports bottle)
This is the engine bay
Your throttle body is connected to your intake
you want to remove it by using your screw driver, then you will stick the straw into the throttle body plate inside
It should look like that with the intake removed
you can stick the tube in to the TB
You will need:
-Screw driver
-1 can of Sea Foam
-a Can
-a baseter tube or funnle tube
-a straw (from a sports bottle)
This is the engine bay
Your throttle body is connected to your intake
you want to remove it by using your screw driver, then you will stick the straw into the throttle body plate inside
It should look like that with the intake removed
you can stick the tube in to the TB
Last edited by b12uceHuy; 06-22-2006 at 08:56 PM.
#2
Jizz Maste12
Thread Starter
Join Date: Jun 2002
Location: DISNEYLAND!
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
It should look something like this, you can pour the Seafoam into the funnel slowly 1/3 of the can your engine should choke and cut off you'll also see smoke coming out of ur exhast, once you finish pouring the SF into the intake let your car set for 5mins then start your car and go for a ride WOT.
start your engine and step on the gas a little
POOF a shit load of smoke will come out
Time for you to get in to your car and go WOT around the block maybe even a trip on the freeway.
Do this a couple of times
start your engine and step on the gas a little
POOF a shit load of smoke will come out
Time for you to get in to your car and go WOT around the block maybe even a trip on the freeway.
Do this a couple of times
Last edited by b12uceHuy; 06-22-2006 at 08:58 PM.
#4
Jizz Maste12
Thread Starter
Join Date: Jun 2002
Location: DISNEYLAND!
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
the trottle plate is INSIDE the throttle body you have to use your finger and push the straw in, its difficult to take a picture of it. Looks just like a carbator but sideways.
#6
Registered User
Join Date: May 2003
Location: IDAHO BOOOO!
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
great idea with the straw, for some reason i didnt think of that, and just used a turkey baster to inject it in, while pulling a little on the throttle cable, spilled a lot of shit all down in my engine compartment, hope it doesnt hurt anything
Matt
Matt
#7
Jizz Maste12
Thread Starter
Join Date: Jun 2002
Location: DISNEYLAND!
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by pirate252
great idea with the straw, for some reason i didnt think of that, and just used a turkey baster to inject it in, while pulling a little on the throttle cable, spilled a lot of shit all down in my engine compartment, hope it doesnt hurt anything
Matt
great idea with the straw, for some reason i didnt think of that, and just used a turkey baster to inject it in, while pulling a little on the throttle cable, spilled a lot of shit all down in my engine compartment, hope it doesnt hurt anything
Matt