**Testing the Waters** Parting out 94 H22 White Honda Accord.....
07-02-2003, 08:01 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: La Plata, Maryland
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
**Testing the Waters** Parting out 94 H22 White Honda Accord.....
My car will be back in my possesion here in the next week or so, just testing the waters to see what people would be interested in. There is a good amount of performance stuff still left on the car, along with a lot of stock items, let me know what you want, and lets make it happen, i need to get the stuff moving, i don't want to look at this car forever, its been too much to bare already.
07-06-2003, 02:57 PM
#2
Junior Member
Join Date: Jul 2003
Location: ohio
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
h22a
i was wondering if you still have the h22 long block from it im sorry to hear about your lose please get back to me at azn_speedracer@hotmail.com thanks man
07-06-2003, 03:28 PM
#3
Senior Member
Thread Starter
Join Date: Jul 2002
Location: La Plata, Maryland
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Here are some of the after market parts that were on the vehicle that are still on it:
>JDM H22a DOHC Vtec (25k)
>H22a tranny and clutch (25k)
>Fluidyne Radiator (dented very slightly on the rear section of the radiator)
INTERIOR
>Factory toupe ( tanish grey color ) front/rear seats/dash/carpet
>Custom Made Chromoly Roll cage (white cage)
>Momo/Neuspeed shift knob (only 5 made)
>Momo carbon fiber pedals (red/carbon fiber)
>SX Engineering High flow fuel pump with custom fittings, AN-6 SS lines, AN-8 SS lines, and filter (fuel set up when i was boosting)
WHEELS/SUSPENSION
>Eibach sportline/Koni front & Neuspeed race/kyb agx rear suspension
>Power Stop rotors in front and in rear
>Goodrich stainless brake lines
>Endless breaks
>Energy Suspension motor mount
>Suspension Techniques anti-sway bars ( f & r )
>OBX top rear strut bar & DC Sports rear lower tie bar
EXTERIOR
>Red/Clear tail lights
>Frost white front bumper with a mesh cut out on below the driver side bumper light
Plus a ton of other odds and ins from the car, just let me know what you would be interested in. I don't have the car in my possesion as of this moment, but I will here in the next few days.
>JDM H22a DOHC Vtec (25k)
>H22a tranny and clutch (25k)
>Fluidyne Radiator (dented very slightly on the rear section of the radiator)
INTERIOR
>Factory toupe ( tanish grey color ) front/rear seats/dash/carpet
>Custom Made Chromoly Roll cage (white cage)
>Momo/Neuspeed shift knob (only 5 made)
>Momo carbon fiber pedals (red/carbon fiber)
>SX Engineering High flow fuel pump with custom fittings, AN-6 SS lines, AN-8 SS lines, and filter (fuel set up when i was boosting)
WHEELS/SUSPENSION
>Eibach sportline/Koni front & Neuspeed race/kyb agx rear suspension
>Power Stop rotors in front and in rear
>Goodrich stainless brake lines
>Endless breaks
>Energy Suspension motor mount
>Suspension Techniques anti-sway bars ( f & r )
>OBX top rear strut bar & DC Sports rear lower tie bar
EXTERIOR
>Red/Clear tail lights
>Frost white front bumper with a mesh cut out on below the driver side bumper light
Plus a ton of other odds and ins from the car, just let me know what you would be interested in. I don't have the car in my possesion as of this moment, but I will here in the next few days.
07-07-2003, 05:58 AM
#6
Senior Member
Thread Starter
Join Date: Jul 2002
Location: La Plata, Maryland
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by PUSHIT
how much are you looking to get for the ST front and rear sway bars?
how much are you looking to get for the ST front and rear sway bars?
07-07-2003, 05:59 AM
#7
Senior Member
Thread Starter
Join Date: Jul 2002
Location: La Plata, Maryland
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by TypeSH
I posted on your thread at hondasociety, but I would be interested in your two front suspension wishbones, and possibly the brake master cylinder.
I posted on your thread at hondasociety, but I would be interested in your two front suspension wishbones, and possibly the brake master cylinder.
07-08-2003, 03:54 AM
#9
Senior Member
Thread Starter
Join Date: Jul 2002
Location: La Plata, Maryland
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Macster33
how much for the shocks?
and how much for the shocks with springs?
how much for the shocks?
and how much for the shocks with springs?