Where to come thru firewall for amp wire?
#1
Where to come thru firewall for amp wire?!?
Where is a good location to come thru the firewall on a 2000 Civic EX for 4 gauge amplifier wiring?? Is there a pre-existing location or will I have to drill?
Thanks
Thanks
#2
Registered User
Join Date: Mar 2003
Location: Tucson AZ
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
you can try to cram it thru one of the grommets that are already there, if not u can drill a hole and get a rubber peice to install the wire thru, both ways are simple, they dont have any holes left open ready to receive a big wire like that. ur gonna have to cram it in or make a new one.
#4
Senior Member
Join Date: Jun 2002
Location: Milwaukee, WI
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
through fire wall
I know this if for an Integra and you have a civic, but I thought it might help you out anyways.
page 6 of this article should help you out - hopefully.
http://www.team-integra.net/sections...?ArticleID=330
Otherwise, here is an post from a few days ago.........
https://www.honda-acura.net/forums/s...threadid=58225
Try a search on it, I am sure that something will come up
page 6 of this article should help you out - hopefully.
http://www.team-integra.net/sections...?ArticleID=330
Otherwise, here is an post from a few days ago.........
https://www.honda-acura.net/forums/s...threadid=58225
Try a search on it, I am sure that something will come up
#5
i went through the existing grommet on the passenger side, directly below the glove compartment, and pulled the wire under the interior side panels from there. i like that spot due to proximity to the battery.
#6
That is the grommet that I am seeing, too. I didn't know if anyone had used it (didn't know exactally where it went). Glad to hear that it worked for you. Will definately use that place since it seems the easiest.