who has actually done LS/Vtec or CRVtec?
#4
i did do the work myself,..it wasnt hard but i do all my own work,..if you are not that comfortable with your motor i suggest you not do it yourself,...it ran fine when i had it but i have since took off the head to sell (going with a different motor *cough2.2cough*),...the head was cheap because i bought it from a friend,...but i dont remember how much everything cost me
#5
how did the car run? did it pull harder then a gsr? any problems with it at all?
ever take it 2 track?
oh yeah, btw. i was looking at ur pictures. dont u gotta have turbo to have a purge kit? wth is a purge kit anyway.
ever take it 2 track?
oh yeah, btw. i was looking at ur pictures. dont u gotta have turbo to have a purge kit? wth is a purge kit anyway.
#6
91' Toyota Supra
Join Date: Dec 2002
Location: Iwakuni, Japan. And where ever the Marine Corps sends me
Posts: 3,809
Likes: 0
Received 0 Likes
on
0 Posts
a purge kit is just to "purge" air out of your nitrous lines some people with turbo set up's use them to help cool the intercooler or the air going into the intercooler i have even seen people use that to cool the solenoids please people correct me if i am wrong
#7
Originally posted by EddieK
how did the car run? did it pull harder then a gsr? any problems with it at all?
ever take it 2 track?
oh yeah, btw. i was looking at ur pictures. dont u gotta have turbo to have a purge kit? wth is a purge kit anyway.
how did the car run? did it pull harder then a gsr? any problems with it at all?
ever take it 2 track?
oh yeah, btw. i was looking at ur pictures. dont u gotta have turbo to have a purge kit? wth is a purge kit anyway.
LSvtec is notorious for leaking oil,..its because people either try to tap them themselves or they have a shitty machine shop do it,...if you have a good machine shop do your work then it will most likely not leak oil
and a purge kit is only to clear out my nitrous line,....its so the nitrous can flow better through the line
#8
thanks ALOT widebody. i was really thinking about doing LS/Vtec but it all sounds like too much for its worth, i dont plan on forced induction or anything. I was about to get a b18b1 from a friend for a good price but i think i'll save up for a b16a2 or b178c1 all motor. wut do ya think?