Clear guage cover...
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Chino, CA
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Clear guage cover...
How do you get this off your trim ring area?
I can remove them both from the actual cluster, not I cant get under the clear plastic...
I can remove them both from the actual cluster, not I cant get under the clear plastic...
#2
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)
#3
Registered User
Thread Starter
Join Date: May 2003
Location: Chino, CA
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Kabooki
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)