3.2 built bottom end
05-14-2003, 03:07 PM
#1
Junior Member
Thread Starter
Join Date: May 2003
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
3.2 built bottom end
has anyone been able to find a stroker kit for this motor?
has anyone tried to just bore it out and put bigger piston's in it?
I've done just about every mod i can to my legend with out touching the engine. And i'm looknig for more power. was curiuos if anyone else had already done this.
has anyone tried to just bore it out and put bigger piston's in it?
I've done just about every mod i can to my legend with out touching the engine. And i'm looknig for more power. was curiuos if anyone else had already done this.
05-16-2003, 07:42 AM
#2
www.acura-legend.com
Join Date: May 2002
Location: Canton, Ohio
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
The only thing I can think of is the 3.5L RL engine, although that engine gets only 215 horspower compared to the 230 HP Type II engine. There will probably never be a stroker kit made for our Legends, you may be able to get somebody to custom make it for you, but you're talking about a lot of $$$ for research and development. Good luck.
Nitrous is probably the easiest way to go, or you can go for broke and have a shop custom install a turbo or a supercharger for some big bucks, expect to spend $8000 or more.
Nitrous is probably the easiest way to go, or you can go for broke and have a shop custom install a turbo or a supercharger for some big bucks, expect to spend $8000 or more.
05-20-2003, 10:17 AM
#3
Junior Member
Thread Starter
Join Date: May 2003
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
yeah i ran nitrious for a long time. and yup a custom turbo kit will run me about 8k. I will find someone to build me a stroker kit :-). i wanna take my 3.2 up to like a 4.0 if i can but we will see.