No Turn Signals
#1
Senior Member
Thread Starter
Join Date: Oct 2002
Location: NY/ CT
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
No Turn Signals
I have a 96 accord and i know that when you dont have the hazard switch in you wont have any blinkers. Well I lost my turn signals today and I dont know how to get them back I checked all the fuses they are all good. I do have the headlights and the jdm corners working but there is no turn signal at all. could this be cause when I hooked up the jdm corners I took one buld out from each side. please someone help me.
#5
Senior Member
Thread Starter
Join Date: Oct 2002
Location: NY/ CT
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
they stop working today I think i cant remember if I used them yesterday, I have checked all the fuses and they are all still good I will double check tomorrow though also. Is there any other good insite that anyone can give me so when I check it out some more tomorrow
#7
un-Touch'd krew
So since we all know the turn signals won't work if the hazard button isn't installed..........is the hazard button fully hooked up?
Connection may have come loose.
If not is the switch burnt out?
Seems logical conclusions to me.
Connection may have come loose.
If not is the switch burnt out?
Seems logical conclusions to me.
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
#8
Im So JDM
Join Date: Dec 2002
Location: Portland Oregon
Posts: 3,724
Likes: 0
Received 0 Likes
on
0 Posts
OK correct me if im wrong. On a Stock 94-97 accord you have 2 bulbs in your corner lights. Im pretty sure one bulb does the blinking and the other bulb stays on. The Real JDM stanley corner lights have one bulb insert. You said you put one bulb in the corner lights. Now I just got a pair of JDM headlights/corner lights. The only bulb/corner plugs that will fit is the the one that stays on all the time. Unless I got some special pair that does not let the blinking bulb/plug fit in it.
So basically you put the blub/plug that stays on fully and left the one that does the blinking out? Am I correct? That is my guess. Im pretty sure it is this cause or the post above.
Jon
So basically you put the blub/plug that stays on fully and left the one that does the blinking out? Am I correct? That is my guess. Im pretty sure it is this cause or the post above.
Jon
#9
Originally posted by 96JdmAccord
OK correct me if im wrong. On a Stock 94-97 accord you have 2 bulbs in your corner lights. Im pretty sure one bulb does the blinking and the other bulb stays on. The Real JDM stanley corner lights have one bulb insert. You said you put one bulb in the corner lights. Now I just got a pair of JDM headlights/corner lights. The only bulb/corner plugs that will fit is the the one that stays on all the time. Unless I got some special pair that does not let the blinking bulb/plug fit in it.
So basically you put the blub/plug that stays on fully and left the one that does the blinking out? Am I correct? That is my guess. Im pretty sure it is this cause or the post above.
Jon
OK correct me if im wrong. On a Stock 94-97 accord you have 2 bulbs in your corner lights. Im pretty sure one bulb does the blinking and the other bulb stays on. The Real JDM stanley corner lights have one bulb insert. You said you put one bulb in the corner lights. Now I just got a pair of JDM headlights/corner lights. The only bulb/corner plugs that will fit is the the one that stays on all the time. Unless I got some special pair that does not let the blinking bulb/plug fit in it.
So basically you put the blub/plug that stays on fully and left the one that does the blinking out? Am I correct? That is my guess. Im pretty sure it is this cause or the post above.
Jon
You can just swap the sockets by cutting off the socket on the one that blinks and rewire it to fit.