Drum Brakes: How To Perform Maintenance
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Atlanta, Georgia
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Rear Drum brakes -- how to change?
I'm going to replace the rotors and pads on my Accord tomorrow in the front, and I was wondering how do people w/ drums do maintainence on the rears? Do you do it @ all or do you just change the brake fluid and leave it like that? Aren't there some components that need to be replaced? Is it hard? I tried a search for the info but I didn't get any good results.
#2
Haven't had drums since the '82 Rabbit
It differs a bit from car to car, but you take off the drum & clean all the dust & crud from around the brake shoes. Clean the springs & levers & stuff while you're in there. Resurface the inside of the drum (kinda like resurfacing rotors). Replace the brake shoes (at least inspect for thickness...)
It differs a bit from car to car, but you take off the drum & clean all the dust & crud from around the brake shoes. Clean the springs & levers & stuff while you're in there. Resurface the inside of the drum (kinda like resurfacing rotors). Replace the brake shoes (at least inspect for thickness...)