another tire question.
03-18-2003, 10:56 AM
#1
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
another tire question.
i recently found a cut in my thread. am i safe driving this for a few more weeks, until i get my new tires? is there anyway to plug of fix this?
thanks for the help.
thanks for the help.
__________________
.
.
03-18-2003, 12:18 PM
#2
Honorary Moderator Alumni
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes
on
0 Posts
Super glue then take it to the tire shop.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
03-18-2003, 12:32 PM
#3
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
what will the tire shop do to it? the cut is only in the rubber. the tire is still inflated and running fine. its been there for a good 4-5 days.
__________________
.
.
03-18-2003, 07:15 PM
#4
Honorary Moderator Alumni
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes
on
0 Posts
They might be able to patch it from the inside for preventative maintance. Don't want your tire blowing.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
03-19-2003, 12:38 AM
#6
it's my D in a B
once I jammed a screw in diagonally through my tire by peeling out on a he-man action figure, (the screw that holds his head to his body). The tire shop was able to plug it up with some molten rubber/glue stuff. It looked a lot worse than yours, so I figure they'll be able to patch yours right up.:thumbup:
