Notices

Hi/Low Beam switch?

Thread Tools
 
Old 03-14-2003, 10:56 PM
  #1  
ueb0258
Junior Member
Thread Starter
 
ueb0258's Avatar
 
Join Date: May 2002
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default Hi/Low Beam switch?

Does anyone know how hard it would be to replace this piece. I have a 96 ls. Didnt relize till tonight that it seems to have gone out. I have had a problem with what seemed to be a short in the dash lights but that went away. If someone has the factory manual and this is an easy job let me know. I will find a manual somewhere and replace it myself.
Old 03-17-2003, 12:49 PM
  #2  
JimBlake
Senior Member
 
JimBlake's Avatar
 
Join Date: Jan 2003
Posts: 1,994
Likes: 0
Received 2 Likes on 1 Post
Default

Take off the plastic shroud around the steering column. The mounting screws for that switch should be pretty obvious, I had mine out a long time ago.

All the airbag wiring is in a bright yellow harness. Don't mess with that so you don't set off the airbag.




All times are GMT -8. The time now is 05:22 PM.