Replacing Rod Bearings in a 1990 Accord
01-05-2010, 07:17 PM
#2
Junior Member
Join Date: Jan 2010
Location: canada, QC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Bearing
what do you mean by rod bearings ? , if you mean piston rod bearings , you need to removed the engine,tranny , timming belt , oil pan , after that removed all the screws of the crankshaft and piston rod , replaced the bearing and follow in reverse , for torque ask me and ill give it to you
01-13-2010, 07:45 PM
#3
Junior Member
Join Date: May 2002
Location: Salt Lake City, UT
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Remove oil pan.
Remove windage tray.
Remove oil pickup tube.
Remove one rod cap.
Get a micrometer and measure.
If it's okay, replace the bearing on the car and move to next rod.
If it's not okay, remove the engine and take the bottom end to a machine shop.
Remove windage tray.
Remove oil pickup tube.
Remove one rod cap.
Get a micrometer and measure.
If it's okay, replace the bearing on the car and move to next rod.
If it's not okay, remove the engine and take the bottom end to a machine shop.
