Acura Integra (non-ITR) 94-01: ITR Rear Sway Bar Install
01-09-2003, 06:59 AM
#1
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
integra type r rear sway bar install on NON-ITR
http://ownerages.com/ITRinstall.htm
this is something i put together a little eariler. feel free to give me feedback.
i havent gotten a chance to really "use" the new sway bar with my regular driving, so im not able to give a review about the performance aspect of it. but theres the install to it on 94+ non type Rs. the non-abs models should be similar other than the modifications to the abs bracket.
this is something i put together a little eariler. feel free to give me feedback.
i havent gotten a chance to really "use" the new sway bar with my regular driving, so im not able to give a review about the performance aspect of it. but theres the install to it on 94+ non type Rs. the non-abs models should be similar other than the modifications to the abs bracket.
__________________
.
.
01-10-2003, 06:56 AM
#3
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by DB7 2.0
someone send me an ITR rear sway bar so i can test out wilma's installation directions
someone send me an ITR rear sway bar so i can test out wilma's installation directions
__________________
.
.
03-01-2003, 11:02 AM
#8
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
Sportmode: all the info is in the link that i am fixing right now. my gf bought me the bar for xmas. the total for everything was under $100.
thanks drumie.
thanks drumie.
__________________
.
.
03-13-2003, 12:57 PM
#9
got JDM milk???
Join Date: Jun 2002
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Type R sway bar... HELP
for the type r sway bars... do i use the endlinks for the civic or the teg's?
also... do i need the bracket #4? and if i use the type r bar.. should i get #2 & #3 part from the teg to use??? please advise ASAP. want to place order this weekend... HELP!!!
also... do i need the bracket #4? and if i use the type r bar.. should i get #2 & #3 part from the teg to use??? please advise ASAP. want to place order this weekend... HELP!!!
P.S. sorry for the repost... but i need this info bad and the thread i posted earlier was dead silent.
also... do i need the bracket #4? and if i use the type r bar.. should i get #2 & #3 part from the teg to use??? please advise ASAP. want to place order this weekend... HELP!!!
also... do i need the bracket #4? and if i use the type r bar.. should i get #2 & #3 part from the teg to use??? please advise ASAP. want to place order this weekend... HELP!!!
P.S. sorry for the repost... but i need this info bad and the thread i posted earlier was dead silent.
03-13-2003, 05:38 PM
#10
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
im not too familar with civics but you will need the bushing and bushing bracket from the ITR bar. meaning you will need #2 and #3 for the ITR bar...
this guy did a really good DIY page...
https://www.honda-acura.net/forums/s...threadid=44087
its not for the civic, but i think their suspension components are pretty similar.
this guy did a really good DIY page...
https://www.honda-acura.net/forums/s...threadid=44087
its not for the civic, but i think their suspension components are pretty similar.
__________________
.
.