diy distributor cap 97 acura tl - Honda-Acura.net

lmangus · 11-28-08, 09:53 PM

easiest way to replace distributor cap on 97 acura tl 2.5?

what wrench would enable me not to have to take battery and it's
shield out?
thanks.

Registered and logged-in users don't see this ad!
Register your free account today.

dockyboy · 01-04-09, 11:52 AM

I believe 10mm. its tough take out battery, make sure you have radio code, remove heat shield, hoses in your way,and a bracket that will let your hand fit in a little more easily, youll see the one on top. its a real PIA
good luck

01-04-09, 11:52 AM	#2
dockyboy Junior Member Join Date: Jan 2009 Location: new jersey Posts: 1	Replace Dist Cap 97 2.5 tl I believe 10mm. its tough take out battery, make sure you have radio code, remove heat shield, hoses in your way,and a bracket that will let your hand fit in a little more easily, youll see the one on top. its a real PIA good luck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode