JDM B16A SIR 2ND GEN 170 HP Engine For Sale. $1850
#1
Junior Member
Thread Starter
Join Date: Oct 2002
Location: MONTREAL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
JDM B16A SIR 2ND GEN 170 HP Engine For Sale. $1850
JDM B16A SIR 2ND GEN 170 HP Engine For Sale. $1850 plus shipping.
Engine INFO:
The engine comes directly from Japan and is official JDM. the mileage on this particular model is less then 40,000 miles. In order to ensure the engine is in good condition, both compression and leak down tests are performed before the engine is exported from Japan. In addition, before shipping, the engine is carefully cleaned and prepared
ENGINE COMES COMPLETE WITH BLOCK,TRANNY AND ECU and as follows:
-Block
-Intake Manifold
-Complete Head
-Sensors
-Exhaust Manifold
-Fuel Rail
-Injectors
-Throttle Body
-Alternator
-Starter
-Ignition Wires or ignitor chip
- Distributor
- Header
Computer (ECU)
5 Speed Manuel or Automatic Transmission
- With Clutch components assembled to the engine
- Intermediate Shaft
- Engine Wiring Harness (Cut)
-B16A SIR 1ST GEN VTEC 170 HP - [B}$1850[/B] Plus $400 for shipping
DOHC VTEC 4 Cylinder 16 Valve
• Hydraulic Transmission
• Redline: 8200 rpm
• Displacement: 1595cc
• Torque: 116 lb-ft@7300
• Horse Power: 170hp@7800
• Compression Ratio: 10.4:1
• P30 OBD-1 or OBD-2 ECU equipped
Shipping time 3 to 7 days by freight with delivery confirmation and insurance. All engines are wrapped up and tide down for safe transportation.
EMAIL ME FOR QUESTIONS OR ORDERS AT
kustomdesignz@hotmail.com
Engine INFO:
The engine comes directly from Japan and is official JDM. the mileage on this particular model is less then 40,000 miles. In order to ensure the engine is in good condition, both compression and leak down tests are performed before the engine is exported from Japan. In addition, before shipping, the engine is carefully cleaned and prepared
ENGINE COMES COMPLETE WITH BLOCK,TRANNY AND ECU and as follows:
-Block
-Intake Manifold
-Complete Head
-Sensors
-Exhaust Manifold
-Fuel Rail
-Injectors
-Throttle Body
-Alternator
-Starter
-Ignition Wires or ignitor chip
- Distributor
- Header
Computer (ECU)
5 Speed Manuel or Automatic Transmission
- With Clutch components assembled to the engine
- Intermediate Shaft
- Engine Wiring Harness (Cut)
-B16A SIR 1ST GEN VTEC 170 HP - [B}$1850[/B] Plus $400 for shipping
DOHC VTEC 4 Cylinder 16 Valve
• Hydraulic Transmission
• Redline: 8200 rpm
• Displacement: 1595cc
• Torque: 116 lb-ft@7300
• Horse Power: 170hp@7800
• Compression Ratio: 10.4:1
• P30 OBD-1 or OBD-2 ECU equipped
Shipping time 3 to 7 days by freight with delivery confirmation and insurance. All engines are wrapped up and tide down for safe transportation.
EMAIL ME FOR QUESTIONS OR ORDERS AT
kustomdesignz@hotmail.com