Notices

picked up a set of freebies today....lets play pick a color :D

Thread Tools
 
Old 08-21-2008, 05:38 PM
  #1  
Civic2Scooby
Thread Starter
 
Civic2Scooby's Avatar
 
Join Date: Jul 2003
Location: michigan
Posts: 28,282
Likes: 0
Received 0 Likes on 0 Posts
Default picked up a set of freebies today....lets play pick a color :D



free > not free h:

They are white, which is the gayest wheel color on the planet. so today in some down time at work I hit a few curb rashes with the dye grinder and smoothed them into the rim lip. Look good as new...Then took some sand paper and went to town. After all this work I decided fuck all this noise I am just gonna grab some aircraft paint stripper and strip them down.

I will be using the Duplicolor wheel coating paint as I have a buddy who used it with great success. I am torn between Bronze and Graphite.


Bronze Duplicolor


Graphite Duplicolor


going on a black EK hatchie.

Old 08-21-2008, 05:53 PM
  #2  
pslsnakes
F#%K JDM, USDM FTW
 
pslsnakes's Avatar
 
Join Date: Apr 2008
Location: Garage kept in Florida
Posts: 538
Likes: 0
Received 0 Likes on 0 Posts
Default

I saw graphite would look best on a black car. Nice hatch by the way.
Old 08-21-2008, 05:59 PM
  #3  
Civic2Scooby
Thread Starter
 
Civic2Scooby's Avatar
 
Join Date: Jul 2003
Location: michigan
Posts: 28,282
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by pslsnakes
I saw graphite would look best on a black car. Nice hatch by the way.
yeah, I too am leaning towards the graphite. for some reason I think the bronze would be a bit much.
Old 08-21-2008, 06:01 PM
  #4  
TheOtherDave™
Apathy Kills
 
TheOtherDave™'s Avatar
 
Join Date: Nov 2002
Location: The Left Lane
Posts: 60,714
Received 0 Likes on 0 Posts
Default

Graphite, no doubt.
__________________
:: :ToDspin: - supermod - but who gives a shit?

:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
Old 08-21-2008, 06:02 PM
  #5  
dubcac
I
 
dubcac's Avatar
 
Join Date: Jan 2001
Location: Westside til I die
Posts: 56,525
Likes: 0
Received 0 Likes on 0 Posts
Default

Bronze on black > *



Old 08-21-2008, 06:16 PM
  #6  
Running925
Your Powder Coater
 
Running925's Avatar
 
Join Date: Mar 2004
Location: Girard, Ohio
Posts: 4,463
Likes: 0
Received 0 Likes on 0 Posts
Default

that s2k is hawt as hellz with the hard top.. :drool:
Old 08-21-2008, 06:30 PM
  #7  
Civic2Scooby
Thread Starter
 
Civic2Scooby's Avatar
 
Join Date: Jul 2003
Location: michigan
Posts: 28,282
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Running925
that s2k is hawt as hellz with the hard top.. :drool:
hey biotch, you never responded to me about the weekend after labor day.
Old 08-21-2008, 06:45 PM
  #8  
Running925
Your Powder Coater
 
Running925's Avatar
 
Join Date: Mar 2004
Location: Girard, Ohio
Posts: 4,463
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Civic2Scooby
hey biotch, you never responded to me about the weekend after labor day.
good possibility on that weekend. we'll have to see as it gets closer.
Old 08-21-2008, 06:49 PM
  #9  
Civic2Scooby
Thread Starter
 
Civic2Scooby's Avatar
 
Join Date: Jul 2003
Location: michigan
Posts: 28,282
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Running925
good possibility on that weekend. we'll have to see as it gets closer.
ok cool. I mite be bringing down a project GSR motor rebuild if you are up to it. Just need to throw a new set of rings/bearings/valve in and get it slapped back together. Let me know if you think we can work that out.
Old 08-21-2008, 07:04 PM
  #10  
Running925
Your Powder Coater
 
Running925's Avatar
 
Join Date: Mar 2004
Location: Girard, Ohio
Posts: 4,463
Likes: 0
Received 0 Likes on 0 Posts
Default

i'm sure we could.. did u measure all clearances already?



All times are GMT -8. The time now is 10:09 PM.