Heater not blowing hot..
12-01-2002, 08:16 PM
#4
Black Pearl
Join Date: Oct 2002
Location: Wisconsin
Posts: 2,517
Likes: 0
Received 0 Likes
on
0 Posts
You should have a valve that opens and closes under your hood to allow the hot coolant to go into the heater core. Open your hood and look for that valve. It should be about the size of a baseball and inline with one of the 5/8 inch size hoses that goes to the firewall. Have a friend move the lever on your dash back and forth to make sure the valve is opening and closing. If it's not, it's probably a broken cable. If it is, it's probably a pluged heater core. Good luck!
Tom
Tom
12-01-2002, 10:55 PM
#5
Junior Member
Thread Starter
Join Date: May 2002
Location: Houston Texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Isnt the 2000 model electronic? I took apart the ac controls to install a radio and it has plugs.. I know the 96-98 model had a lever that had some kinda rod connecting to it.
12-01-2002, 10:58 PM
#6
wooooo woooooooooo
Join Date: Mar 2002
Location: Twin Cities
Posts: 3,134
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Din
Isnt the 2000 model electronic? I took apart the ac controls to install a radio and it has plugs.. I know the 96-98 model had a lever that had some kinda rod connecting to it.
Isnt the 2000 model electronic? I took apart the ac controls to install a radio and it has plugs.. I know the 96-98 model had a lever that had some kinda rod connecting to it.
