ecu tuning /using nokia cable
#1
Junior Member
Thread Starter
Join Date: Jul 2008
Location: united arab emirates
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
ecu tuning /using nokia cable
good news to save 30$ or more using hullog , data cable connecting your ecu with laptop
use nokia DKU- 5 cable as shown below
1 nokia cable
2 soldering wire
3 make sure when u connect read my instructions as lot of people are not familier with connections
this is for all honda lovers
cya
use nokia DKU- 5 cable as shown below
1 nokia cable
2 soldering wire
3 make sure when u connect read my instructions as lot of people are not familier with connections
this is for all honda lovers
cya
#2
Junior Member
Thread Starter
Join Date: Jul 2008
Location: united arab emirates
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
sorry add this info
Solder the Ground conductor to #1 pin on CN2
Solder the Receive Signal wire to #2 pin on CN2
Solder the Send Signal to #4 pin on CN2
Solder the Ground conductor to #1 pin on CN2
Solder the Receive Signal wire to #2 pin on CN2
Solder the Send Signal to #4 pin on CN2